Across Europe and beyond, teams of young people are receiving data from the International Space Station (ISS) this week. That’s because they participated in the annual European Astro Pi Challenge, the unique programme we deliver in collaboration with ESA Education to give kids the chance to write code that runs in space.

In this round of Astro Pi, over 26,400 young people took part across its two missions — Mission Space Lab and Mission Zero — and had their programs run on the Raspberry Pi computers on board the ISS.

Mission Space Lab teams find out the speed of the ISS

In Mission Space Lab, we asked young people to team up and write code to collect data on the ISS and calculate the speed at which the ISS is travelling. 236 teams wrote programs that passed all our tests and achieved flight status to run in space. And not only will the Mission Space Lab teams receive their participation certificates this week — they’ll also receive the data their programs captured on the ISS.

Many teams chose a feature extraction method to calculate the ISS’s speed, identifying two points on Earth from which to calculate the distance the ISS travelled over time. Using this method means using the high-quality camera on the Astro Pi computer to take some fantastic photos of Earth from the ISS’s World Observation Research Facility (WORF) window. Teams will receive these photos soon, which are unique views of Earth from space.

How fast does the ISS travel? 

The actual speed that the ISS is travelling in space while at normal altitude is 7.66km/s. Its altitude can affect the speed, so it can vary, but the ISS’s boosters fire up if it dips too low.

To help teams with writing programs that can adapt to some of these variances, and to show them the type data they can collect, we gave them a programming tool we call Astro Pi Replay. Using this tool, teams can simulate how their program would run on the Astro Pi computers up in space.

This is the first time we asked Mission Space Lab teams to focus on a particular scientific question. So how did they do? The graph below shows some of the speeds that teams’ programs estimated. 

As you can see, a variety of speeds were estimated, but the average is fairly close to the ISS’s actual speed. Teams did a great job trying to solve the question and working like real space scientists. Once they receive their data this week, they can check how accurate their speed estimate was.

Mission Zero pixel art lights up astronauts’ daily tasks 

In Astro Pi Mission Zero, a coding activity suitable for beginners, 16,039 teams of young people created code to make pixel art inspired by nature. Nearly half (44%) of the 24,409 participants were girls! 15,942 of the Mission Zero teams had their code run on the ISS after we checked that it followed the rules.

Every team whose program ran on the ISS — with their pixel art showing for the astronauts to see as they worked — will receive certificates with the time, date, and location coordinates of their Mission Zero run. 

We’ve been so impressed with this year’s pixel art creations that we’ve picked some as new examples for next year’s Mission Zero coding guide. That means young people will be able to choose one of a few pixel images to start with and recreate or remix them for their program. More info on that is coming soon, sign up to the Astro Pi newsletter to not miss it.

Let’s get ready for September

Thank you and congratulations to everyone who took part in the missions this year, and our special thanks to all the amazing educators who ran Astro Pi activities with young people.

For us, there is much to reflect on and celebrate from this year’s challenge. We’ve had the chance to run Mission Zero with young people in person and identify a few changes to help make the activity easier. As Mission Space Lab now involves simulating programs running on the ISS with our new Astro Pi Replay tool, we’ll be exploring how to improve this as well.

We hope to engage lots of previous and new participants in the Astro Pi Challenge when it starts up again in September. Sign up for the newsletter on astro-pi.org to be the first to hear about the new round.

The post Young people receive their data from space and Astro Pi certificates appeared first on Raspberry Pi Foundation.

Young people taking part in the European Astro Pi Challenge are about to have their computer programs sent to the International Space Station (ISS). Astro Pi is run annually in collaboration by us and ESA Education, and offers two ways to get involved: Mission Zero and Mission Space Lab.

This year, over 25,000 young people from across Europe and eligible ESA Member States are getting their programs ‘uplinked’ to the Astro Pi computers aboard the ISS, where they will be running over the next few weeks. 

Mission Zero teams send their art into space

Mission Zero is an exciting activity for kids with little or no experience with coding. We invite young people to create a Python program that displays an 8×8 pixel image or animation. This program then gets sent to the ISS, and each pixel art piece is displayed for 30 seconds on the LED matrix display of the Astro Pi computers on the ISS.

We picked the theme ‘fauna and flora’ as the inspiration for young people’s pixel art, as it proved so popular last year, and we weren’t disappointed: this year, 24,378 young people submitted 16,039 Mission Zero creations!  

We’ve tested every program and are pleased to announce that 15,942 Mission Zero programs will be sent to run on the ISS from mid May. 

Once again, we have been amazed at the wonderful images and animations that young people have created. Seeing all the images that have been submitted is one of the most enjoyable and inspiring things to do as we work on the Astro Pi Challenge. Here is a little selection of some of our favourites submitted this year:

Varied approaches: How different teams calculate ISS speed

For Mission Space Lab, we invite more experienced young coders to take on a scientific challenge: to calculate the speed that the ISS orbits Earth. 

Teams are tasked with writing a program that uses the Astro Pis’ sensors and visible light camera to capture data for their calculations, and we have really enjoyed seeing the different approaches the teams have taken. 

Some teams decided to calculate the distance between two points in photos of the Earth’s surface and combine this with how long it took for the ISS to pass over the points to find the speed. This particular method uses feature extraction and needs to account for ground sampling distance — how many square metres are represented in one pixel in an image of the ground taken from above — to get an accurate output.  

We’ve also seen teams use data from the gyroscope to calculate the speed using the angle readings and photos to get their outputs. Yet other teams have derived the speed using equations of motion and sampling from the accelerometer.

All teams that took multiple samples from the Astro Pi sensors, or multiple images, had to decide how to output a final estimate for the speed of the ISS. Most teams opted to use the mean average. But a few teams chose to filter their samples to choose only the ‘best’ ones based on prior knowledge (Bayesian filtering), and some used a machine learning model and the Astro Pi’s machine learning dongle to select which images or data samples to use. Some teams even provided a certainty score along with their final estimate.

236 Mission Space Lab teams awarded flight status

However the team choses to approach the challenge, before their program can run on the ISS, we need to make sure of a few things. For a start, we check that they’ve followed the challenge rules and meet the ISS security requirements. Next, we check that the program can run without errors on the Astro Pis as the astronauts on board the ISS can’t stop what they’re doing to fix any problems. 

So, all programs submitted to us must pass a rigorous testing process before they can be sent into space. We run each program on several replica Astro Pis, then run all the programs sequentially, to ensure there’s no problems. If the program passes testing, it’s awarded ‘flight status’ and can be sent to run in space.

This year, 236 teams have been awarded flight status. These teams represent 889 young people from 22 countries in Europe and ESA member states. The average age of these young people is 15, and 27% of them are girls. The UK has the most teams achieving flight status (61), followed by the Czech Republic (23) and Romania (22). You can see how this compares to last year and explore other breakdowns of participant data in the annual Astro Pi impact report.  

Our congratulations to all the Mission Space Lab teams who’ve been awarded flight status: it is a great achievement. All these teams will be invited to join a live online Q&A with an ESA astronaut in June. We can’t wait to see what questions you send us for the astronaut.

A pause to recharge the ISS batteries 

Normally, the Astro Pi programs run continuously from the end of April until the end of May. However, this year, there is an interesting event happening in the skies above us that means that programs will pause for a few days. The ISS will be moving its position on the ‘beta angle’ and pivoting its orientation to maximise the sunlight that it can capture with its solar panels. 

The ISS normally takes 90 minutes to complete its orbit, 45 minutes of which is in sunlight, and 45 minutes in darkness. When it moves along the beta angle, it will be in continual sunlight, allowing it to capture lots of solar energy and recharge its batteries. While in its new orientation, the ISS is exposed to increased heat from the sun so the window shutters must be closed to help the astronauts stay cool. That means taking photos of the Earth’s surface won’t be possible for a few days.

What next?

Once all of the programs have run, we will send the Mission Space Lab teams the data collected during their experiments. All successful Mission Zero and Mission Space Lab teams and mentors will also receive personal certificates to recognise their mission completion.

Congratulations to all of this year’s Astro Pi Challenge participants, and especially to all successful teams.

The post Young people’s Astro Pi code is sent to the International Space Station appeared first on Raspberry Pi Foundation.

Since November, registration is open for Mission Space Lab, part of the European Astro Pi Challenge 2023/24. The Astro Pi Challenge is an ESA Education project run in collaboration with us here at the Raspberry Pi Foundation that gives young people up to age 19 the amazing opportunity to write computer programs that run on board the International Space Station (ISS). It is free to take part and young people can participate in two missions: Mission Zero, designed for beginners, and Mission Space Lab, designed for more experienced coders.

This year, Mission Space Lab has a brand-new format. As well as introducing a new activity for teams to work on, we have created new resources to support teams and mentors, and developed a special tool to help teams test their programs. 

A big motivator for these changes was to make the activity more accessible and enable more young people to have their code run in space. Listening to feedback from participants and mentors, we are creating the opportunity for even more teams to submit programs that run on the ISS this year, by offering a specific activity and providing more extensive support materials.

A scientific task

For this year’s mission, ESA astronauts have given teams a specific scientific task to solve: to calculate the speed that the ISS is travelling as it orbits the Earth. People working in science often investigate a specific phenomenon or try to solve a particular problem. They have to use their knowledge and skills and the available tools to find ways to answer their research question. For Mission Space Lab, teams will work just like this. They will look at what sensors are available on the Astro Pi computers on board the ISS, develop a solution, and then write a Python program to execute it. To test their program, they will use the new Astro Pi Replay software tool we’ve created, which simulates running their program on board the ISS.

To help teams and mentors take part in Mission Space Lab, we are providing a variety of supporting materials:

• Our mentor guide has everything mentors need to support their teams through Mission Space Lab, including guidance for structuring the mission and tips to help teams solve problems.
• Our creator guide helps young people design and create their programs. It provides information and technical instructions to help young people develop their coding skills and create a program that can be run on the Astro Pis on board the ISS.
• We have created an ISS speed project guide that shows an example of how the scientific task can be solved using photos captured by the Astro Pi’s camera.

We have also run virtual sessions to help mentors and teams familiarise themselves with the new Mission Space Lab activity, and to ask any technical questions they might have. You can watch the recordings of these sessions on YouTube: 

• Getting started with Astro Pi Mission Space Lab
• Astro Pi Mission Space Lab live Q&A

The Astro Pi Replay tool

Astro Pi Replay is a new simulation tool that we have developed to support Mission Space Lab teams to test their programs. The tool simulates running programs on the Astro Pi computers on board the ISS. It is a Python library available as a plug-in to install in the Thonny IDE where teams write their programs. Thanks to this tool, teams can develop and test their programs on any computer that supports Python, without the need for hardware like the Astro Pi units on board the ISS.

The Astro Pi Replay tool works by replaying a data set captured by a Mission Space Lab team in May 2023. The data set includes readings from the Astro Pi ‘s sensors, and images taken by its visible-light camera like the ones below. Whenever teams run their programs in Thonny with Astro Pi Replay, the tool replays some of this historical data. That means teams can use the historical data to test their programs and calculations.

One of the benefits of using this simulation tool is that it gives teams a taste of what they can expect if their program is run on the ISS. By replaying a sequence of data captured by the Astro Pis in space, teams using sensors will be able to see what kind of data can be collected, and teams using the camera will be able to see some incredible Earth observation images.

If you’re curious about how Astro Pi Replay works, you’ll be pleased to hear we are making it open source soon. That means you’ll be able to look at the source code and find out exactly what the library does and how.

Get involved

Community members have consistently reported how amazing it is for teams to receive unique Earth observation photos and sensor data from the Astro Pis, and how great the images and data are to inspire young people to participate in their computing classes, clubs, or events. Through the changes we’ve made to Mission Space Lab this year, we want to support as many young people as possible to have the opportunity to engage in space science and capture their own data from the ISS. 

If you want a taste of how fantastic Astro Pi is for learners, watch the story of St Joseph’s, a rural Irish school where participating in Astro Pi has inspired the whole community.

Submissions for Mission Space Lab 2023/24 are open until 19 February 2024, so there’s still time to take part! You can find full details and eligibility criteria at astro-pi.org/mission-space-lab.

If you have any questions about the European Astro Pi Challenge, please get in touch at [email protected].

The post Get ready for Mission Space Lab with our new simulation tool appeared first on Raspberry Pi Foundation.