This will be a running review of the NARWAL Freo X Plus until it’s complete at which point this line won’t be here. I will update it as anything new occurs.

TL;DR – running review, good hardware, software needs work.

The NARWAL Freo X Plus is a sub $400 vacuum with a lift/drag mop and a 7-week onboard storage dust bin that can be either reused or tossed (separate bins included) and on paper it’s on par with my current favorite vacuum minus Google Home/Assistant support and a vibrating mop. This hasn’t replaced Rhonda, people who managed to turn these reviews around in under a month of use concern me for their attention to detail as I’m planning to run this like I run a long haired dog grooming shop.

The Freo X Plus features a tangle-free brush, 7800Pa suction, Tri-laser navigation and obstacle avoidance, LiDAR SLAM 4.0, and claims it will not be bumping into things. It also does mopping and vacuuming in one pass with a slightly retractable mop.

Narwal Freo X Plus specs

NARWAL Freo X Plus unboxing and initial impressions

Due to a microphone issue the unboxing video I shot is going to be edited to be a silent film reminiscent of the 1920s inspired by the film Hundreds of Beavers and will be coming later. This was like every puck vacuum I’ve ever opened with the exception of the two disposable dust bins they include. The disposable bin’s bag, and the bags that surround items to protect them are the same thickness and I almost ripped through one as I thought it was stuck on a filter. Don’t rip anything. It’s not required.

There’s a nice thick manual you’ll never use, and pulling off the foam protector and two taped on shipping tabs you’re ready to go. My Freo X Pro was not initially. I could not get it to power on until after I plugged it into the dock. This may be in the instruction manual. I will look and edit this if it is, but it is something to note that I needed to put it on a charger the first time.

Registration requires an email address and that appeared to be it. A code is emailed, it shows up a minute or two later, enter that and you’re ready to go. The software warned me it only worked in 2.4ghz mode, but worked fine on my AP that handles both.

I was informed my firmware needed updated and then informed that the update failed almost instantly. A few attempts get it to download and update, but the app never registered that the vacuum had updated and I eventually exited the app and came back in.

I chose a room at my work that in theory was vacuumed recently but people keep going in there to scream (no, I really have no idea why.) Figured it would be a good first test. as the room looked fairly clean with one little piece of paper no bigger than a pinky fingernail sitting near a corner.

Now, the software looks a whole lot like the software I’ve used on Roborock so there’s a chance I just blew through something important but after a nice and short room mapping session I thought I was ready to go. I chose vacuum and mop, as I expected that maybe it would pick up the plastic chair protectors on the floor as a mopable surface, and said go.

The very first thing the NARWAL Freo X Plus did was make a quick hard turn, grab the power cord, and proceed to spend about a minute and a half fighting, knocking the base around, and completely destroying the setup. It finally escaped and I repositioned the station directly underneath the power outlet and hung the cable up carefully so it could not do that again.

I wandered out, came back a few minutes later and it had docked and I got that the cleaning was complete. The little piece of paper was still where it laid.

I started the unit up again to clean, it came out about two feet, turned, went to the wall, turned, came back, turned and went to the docking station telling me it was done. I tried pressing the button up top, same results. I told it to mop only. Same results. Told it to vacuum only. Same results.

I decided to delete the map and try again. After my second quick mapping, on the first run I decided to stay for the entire thing. It drove to three locations in the room, turned around at each, and went directly back to the base unit.

I went to edit the map and evidently everything it had mapped was listed as don’t vacuum/mop. Changing this to ignore resulted in the vacuum actually working although it does concern me why it would discover and then default to don’t clean here.

I ran the unit again, the piece of paper on the ground was removed, and things looked pretty good. It vacuumed up a fair amount of dirt, about what I would expect our cleaner’s vacuum to have left. It also vacuumed up a spider that is alive and I can now never touch the thing again.

I decided to run the unit again and choose extreme power… whoo hoo. a while later (24 minutes if I remember correctly,) I got the notification that it was done and successful. I opened the app and noticed the puck indicating the vacuum was not at the base station. I went into the office and yeah, it stopped. No reason given. No error message saying something prevented it from returning to the dock. Just stopped. Appears to have done a good job, but it stopped. Worked once, then done. Screw it boss I’m taking a nap right here.

I have attempted to wipe and restart and there is no evident option to do this from the software.

Evidently I chose vacuum and mop assuming it would not mop my carpet. With however my map is set up however that was not the case. Maybe the carpet sensors are not detecting my carpet as carpet. I have now manually set it to carpet.

Thus far

Keeping in mind this review isn’t done

• Software needs some work
• Vacuum is fairly quiet compared to other less powerful vacuums
• Doesn’t detect plastic floor coverings as a different surface – no mopping for them
• Obstacle avoidance doesn’t appear to avoid low hanging wires
• You have to remove the entire top to access dust and water containers. Attempting to access water container knocks it out of the charging dock.
• Chairs, tables, etc do not appear to be recognized. They are avoided but this makes defining no go zones a bit difficult.
• 3D view doesn’t show cleaning progress, no detected furniture or obstacles listed (maybe after more than 5 runs?)
• No hair tangled on brush, but too early to go “whoo hoo!”
• No recall / return to home from the app? (button works)

Wrapping up for the moment

I can not manufacture time and enough dirt and hair to complete the testing this needs at this point but at the moment I speculate that a software and firmware update are going to make this an extremely good little vacuum, but at the moment due to the experience the NARWAL Freo X Plus is a bit frustrating and I consider just ok. We’ll see tomorrow when I throw it in a room it needs to mop and vacuum.

Early May

The Freo X is slightly better than any other vacuum I’ve encountered at being able to pull USB cables out of it while it’s running, but unfortunately it still will run over easy to spot obstacles which considering it doesn’t have a camera I guess is to be expected.

I notice it occasionally bumps into what I’d call the chair leg category. It’s great at avoiding chair feet, but if you have a thin vertical thing it will often whack into it. It seems to do very good at not whacking into walls, desks, desk chairs, but put a cast iron patio chair there and it can’t see the legs.

There doesn’t appear to be a consistent option for “just figure out and clean this room.” Most vacuums I’ve run across have a smart clean, but this when I pressed the power in another room worked once and then demanded it be returned to the base. Nothing would get it to try and work in another room.

The vacuum so far (11 runs two rooms) appears to work well. It does corners better than anything I’ve noticed, picks up dirt a stand up vacuum missed. It’s better than anything I’ve reviewed in the price range by far, but not as good as some of the higher priced units I’ve run across.

Needs a major software update on Android and a re-working of how things are done… since it appears to be the same software others are using, copy their workflow. Just clean the room you’re in if I press the power button. Gimme a “map new room” option without having to go through multiple menus.

I point out the flaws because it could be the best and so far a software update I think could make it the best and on par with robot vacs twice the price.

Where’s the NARWAL Freo X Plus available?

You can grab a NARWAL Freo X Plus on Narwal’s website or on Amazon.

NARWAL Freo X Plus running review by Paul E King first appeared on Pocketables.

The Narwal Freo X Plus is a new puck robo vac from Narwal that brings something new to the table: “Guaranteed 0% tangle rate with pet fur and long hair up to 16 inches.”

Right now I am in the process of testing and reviewing the Narwal Freo X Plus. Unfortunately, or fortunately, I don’t have a whole lot of hair or filthy floors to really give it a good short turnaround review (it was received last week). A real review is going to come later when it’s been used and exposed to a real environment. Consider this marketing for the review rather than an endorsement.

If like me most of your interactions with your robot vacuum involve taking a knife and removing hair from a large lump that used to be the brush, you’ll know what a difference this could make.

The Narwal Freo X Plus appears to be a more self-contained version of the Freo X Ultra with a minimalist docking station and slightly less suction, however having not reviewed that one I can’t go line by line comparing them.

7800pa suction tops the charts in terms of tiny but mighty suction, although as we’ve discussed previously that it’s airflow that counts more than suction power. Both really, but we’ll see.

It packs nearly two months of onboard dust and waste storage, a removable disposable storage bag, and claims to be able to avoid bumping into things utilizing multiple LiDAR systems to do so.

Like my beloved Rhonda, it has an intelligent lifting mop that will lift a third of an inch so that it doesn’t drag smelly mop water across your rug.

The software looks cool… at least in the previews. Reminds me a bit of the Xaomi/Roborock software and I wonder if they aren’t the same thing (this is how early I am in testing this).

Anyway, I will have a review when I have it tested. The Narwal Freo X Plus looks like a pet-lover’s dream, but so have many other vacuums I’ve tested before that made this claim. We’ll see how it fairs against two shorthaired cats and three longhaired humans.

There is / was an early bird discount using code NARWALNEW001. I am assuming this was on their website.

The Narwal Freo X Plus should be releasing on Amazon today, and also on Narwal’s website. I’m posting this after the embargo hour and neither link is showing in stock or orderable.

Reviews from Vine (Amazon’s free review program) tend to indicate it’s currently well loved, however these are first week reviews of free product and I highly doubt anyone can give this a thorough review until they’ve lived with it a bit.

Narwal Freo X Plus specs

Anyhow, I expect to have a rundown of how it fares against a whole lot of hair shortly.

Have started the running review of the unit here

Narwal Freo X Plus introduces a tangle free main brush in a small footprint vac by Paul E King first appeared on Pocketables.

This will be a running review of the NARWAL Freo X Plus until it’s complete at which point this line won’t be here. I will update it as anything new occurs.

TL;DR – running review, good hardware, software needs work.

The NARWAL Freo X Plus is a sub $400 vacuum with a lift/drag mop and a 7-week onboard storage dust bin that can be either reused or tossed (separate bins included) and on paper it’s on par with my current favorite vacuum minus Google Home/Assistant support and a vibrating mop. This hasn’t replaced Rhonda, people who managed to turn these reviews around in under a month of use concern me for their attention to detail as I’m planning to run this like I run a long haired dog grooming shop.

The Freo X Plus features a tangle-free brush, 7800Pa suction, Tri-laser navigation and obstacle avoidance, LiDAR SLAM 4.0, and claims it will not be bumping into things. It also does mopping and vacuuming in one pass with a slightly retractable mop.

Narwal Freo X Plus specs

NARWAL Freo X Plus unboxing and initial impressions

Due to a microphone issue the unboxing video I shot is going to be edited to be a silent film reminiscent of the 1920s inspired by the film Hundreds of Beavers and will be coming later. This was like every puck vacuum I’ve ever opened with the exception of the two disposable dust bins they include. The disposable bin’s bag, and the bags that surround items to protect them are the same thickness and I almost ripped through one as I thought it was stuck on a filter. Don’t rip anything. It’s not required.

There’s a nice thick manual you’ll never use, and pulling off the foam protector and two taped on shipping tabs you’re ready to go. My Freo X Pro was not initially. I could not get it to power on until after I plugged it into the dock. This may be in the instruction manual. I will look and edit this if it is, but it is something to note that I needed to put it on a charger the first time.

Registration requires an email address and that appeared to be it. A code is emailed, it shows up a minute or two later, enter that and you’re ready to go. The software warned me it only worked in 2.4ghz mode, but worked fine on my AP that handles both.

I was informed my firmware needed updated and then informed that the update failed almost instantly. A few attempts get it to download and update, but the app never registered that the vacuum had updated and I eventually exited the app and came back in.

I chose a room at my work that in theory was vacuumed recently but people keep going in there to scream (no, I really have no idea why.) Figured it would be a good first test. as the room looked fairly clean with one little piece of paper no bigger than a pinky fingernail sitting near a corner.

Now, the software looks a whole lot like the software I’ve used on Roborock so there’s a chance I just blew through something important but after a nice and short room mapping session I thought I was ready to go. I chose vacuum and mop, as I expected that maybe it would pick up the plastic chair protectors on the floor as a mopable surface, and said go.

The very first thing the NARWAL Freo X Plus did was make a quick hard turn, grab the power cord, and proceed to spend about a minute and a half fighting, knocking the base around, and completely destroying the setup. It finally escaped and I repositioned the station directly underneath the power outlet and hung the cable up carefully so it could not do that again.

I wandered out, came back a few minutes later and it had docked and I got that the cleaning was complete. The little piece of paper was still where it laid.

I started the unit up again to clean, it came out about two feet, turned, went to the wall, turned, came back, turned and went to the docking station telling me it was done. I tried pressing the button up top, same results. I told it to mop only. Same results. Told it to vacuum only. Same results.

I decided to delete the map and try again. After my second quick mapping, on the first run I decided to stay for the entire thing. It drove to three locations in the room, turned around at each, and went directly back to the base unit.

I went to edit the map and evidently everything it had mapped was listed as don’t vacuum/mop. Changing this to ignore resulted in the vacuum actually working although it does concern me why it would discover and then default to don’t clean here.

I ran the unit again, the piece of paper on the ground was removed, and things looked pretty good. It vacuumed up a fair amount of dirt, about what I would expect our cleaner’s vacuum to have left. It also vacuumed up a spider that is alive and I can now never touch the thing again.

I decided to run the unit again and choose extreme power… whoo hoo. a while later (24 minutes if I remember correctly,) I got the notification that it was done and successful. I opened the app and noticed the puck indicating the vacuum was not at the base station. I went into the office and yeah, it stopped. No reason given. No error message saying something prevented it from returning to the dock. Just stopped. Appears to have done a good job, but it stopped. Worked once, then done. Screw it boss I’m taking a nap right here.

I have attempted to wipe and restart and there is no evident option to do this from the software.

Evidently I chose vacuum and mop assuming it would not mop my carpet. With however my map is set up however that was not the case. Maybe the carpet sensors are not detecting my carpet as carpet. I have now manually set it to carpet.

Thus far

Keeping in mind this review isn’t done

• Software needs some work
• Vacuum is fairly quiet compared to other less powerful vacuums
• Doesn’t detect plastic floor coverings as a different surface – no mopping for them
• Obstacle avoidance doesn’t appear to avoid low hanging wires
• You have to remove the entire top to access dust and water containers. Attempting to access water container knocks it out of the charging dock.
• Chairs, tables, etc do not appear to be recognized. They are avoided but this makes defining no go zones a bit difficult.
• 3D view doesn’t show cleaning progress, no detected furniture or obstacles listed (maybe after more than 5 runs?)
• No hair tangled on brush, but too early to go “whoo hoo!”
• No recall / return to home from the app? (button works)

Wrapping up for the moment

I can not manufacture time and enough dirt and hair to complete the testing this needs at this point but at the moment I speculate that a software and firmware update are going to make this an extremely good little vacuum, but at the moment due to the experience the NARWAL Freo X Plus is a bit frustrating and I consider just ok. We’ll see tomorrow when I throw it in a room it needs to mop and vacuum.

Early May

The Freo X is slightly better than any other vacuum I’ve encountered at being able to pull USB cables out of it while it’s running, but unfortunately it still will run over easy to spot obstacles which considering it doesn’t have a camera I guess is to be expected.

I notice it occasionally bumps into what I’d call the chair leg category. It’s great at avoiding chair feet, but if you have a thin vertical thing it will often whack into it. It seems to do very good at not whacking into walls, desks, desk chairs, but put a cast iron patio chair there and it can’t see the legs.

There doesn’t appear to be a consistent option for “just figure out and clean this room.” Most vacuums I’ve run across have a smart clean, but this when I pressed the power in another room worked once and then demanded it be returned to the base. Nothing would get it to try and work in another room.

The vacuum so far (11 runs two rooms) appears to work well. It does corners better than anything I’ve noticed, picks up dirt a stand up vacuum missed. It’s better than anything I’ve reviewed in the price range by far, but not as good as some of the higher priced units I’ve run across.

Needs a major software update on Android and a re-working of how things are done… since it appears to be the same software others are using, copy their workflow. Just clean the room you’re in if I press the power button. Gimme a “map new room” option without having to go through multiple menus.

I point out the flaws because it could be the best and so far a software update I think could make it the best and on par with robot vacs twice the price.

Where’s the NARWAL Freo X Plus available?

You can grab a NARWAL Freo X Plus on Narwal’s website or on Amazon.

NARWAL Freo X Plus running review by Paul E King first appeared on Pocketables.

The Narwal Freo X Plus is a new puck robo vac from Narwal that brings something new to the table: “Guaranteed 0% tangle rate with pet fur and long hair up to 16 inches.”

Right now I am in the process of testing and reviewing the Narwal Freo X Plus. Unfortunately, or fortunately, I don’t have a whole lot of hair or filthy floors to really give it a good short turnaround review (it was received last week). A real review is going to come later when it’s been used and exposed to a real environment. Consider this marketing for the review rather than an endorsement.

If like me most of your interactions with your robot vacuum involve taking a knife and removing hair from a large lump that used to be the brush, you’ll know what a difference this could make.

The Narwal Freo X Plus appears to be a more self-contained version of the Freo X Ultra with a minimalist docking station and slightly less suction, however having not reviewed that one I can’t go line by line comparing them.

7800pa suction tops the charts in terms of tiny but mighty suction, although as we’ve discussed previously that it’s airflow that counts more than suction power. Both really, but we’ll see.

It packs nearly two months of onboard dust and waste storage, a removable disposable storage bag, and claims to be able to avoid bumping into things utilizing multiple LiDAR systems to do so.

Like my beloved Rhonda, it has an intelligent lifting mop that will lift a third of an inch so that it doesn’t drag smelly mop water across your rug.

The software looks cool… at least in the previews. Reminds me a bit of the Xaomi/Roborock software and I wonder if they aren’t the same thing (this is how early I am in testing this).

Anyway, I will have a review when I have it tested. The Narwal Freo X Plus looks like a pet-lover’s dream, but so have many other vacuums I’ve tested before that made this claim. We’ll see how it fairs against two shorthaired cats and three longhaired humans.

There is / was an early bird discount using code NARWALNEW001. I am assuming this was on their website.

The Narwal Freo X Plus should be releasing on Amazon today, and also on Narwal’s website. I’m posting this after the embargo hour and neither link is showing in stock or orderable.

Reviews from Vine (Amazon’s free review program) tend to indicate it’s currently well loved, however these are first week reviews of free product and I highly doubt anyone can give this a thorough review until they’ve lived with it a bit.

Narwal Freo X Plus specs

Anyhow, I expect to have a rundown of how it fares against a whole lot of hair shortly.

Have started the running review of the unit here

Narwal Freo X Plus introduces a tangle free main brush in a small footprint vac by Paul E King first appeared on Pocketables.

This will be a running review of the NARWAL Freo X Plus until it’s complete at which point this line won’t be here. I will update it as anything new occurs.

TL;DR – running review, good hardware, software needs work.

The NARWAL Freo X Plus is a sub $400 vacuum with a lift/drag mop and a 7-week onboard storage dust bin that can be either reused or tossed (separate bins included) and on paper it’s on par with my current favorite vacuum minus Google Home/Assistant support and a vibrating mop. This hasn’t replaced Rhonda, people who managed to turn these reviews around in under a month of use concern me for their attention to detail as I’m planning to run this like I run a long haired dog grooming shop.

The Freo X Plus features a tangle-free brush, 7800Pa suction, Tri-laser navigation and obstacle avoidance, LiDAR SLAM 4.0, and claims it will not be bumping into things. It also does mopping and vacuuming in one pass with a slightly retractable mop.

Narwal Freo X Plus specs

NARWAL Freo X Plus unboxing and initial impressions

Due to a microphone issue the unboxing video I shot is going to be edited to be a silent film reminiscent of the 1920s inspired by the film Hundreds of Beavers and will be coming later. This was like every puck vacuum I’ve ever opened with the exception of the two disposable dust bins they include. The disposable bin’s bag, and the bags that surround items to protect them are the same thickness and I almost ripped through one as I thought it was stuck on a filter. Don’t rip anything. It’s not required.

There’s a nice thick manual you’ll never use, and pulling off the foam protector and two taped on shipping tabs you’re ready to go. My Freo X Pro was not initially. I could not get it to power on until after I plugged it into the dock. This may be in the instruction manual. I will look and edit this if it is, but it is something to note that I needed to put it on a charger the first time.

Registration requires an email address and that appeared to be it. A code is emailed, it shows up a minute or two later, enter that and you’re ready to go. The software warned me it only worked in 2.4ghz mode, but worked fine on my AP that handles both.

I was informed my firmware needed updated and then informed that the update failed almost instantly. A few attempts get it to download and update, but the app never registered that the vacuum had updated and I eventually exited the app and came back in.

I chose a room at my work that in theory was vacuumed recently but people keep going in there to scream (no, I really have no idea why.) Figured it would be a good first test. as the room looked fairly clean with one little piece of paper no bigger than a pinky fingernail sitting near a corner.

Now, the software looks a whole lot like the software I’ve used on Roborock so there’s a chance I just blew through something important but after a nice and short room mapping session I thought I was ready to go. I chose vacuum and mop, as I expected that maybe it would pick up the plastic chair protectors on the floor as a mopable surface, and said go.

The very first thing the NARWAL Freo X Plus did was make a quick hard turn, grab the power cord, and proceed to spend about a minute and a half fighting, knocking the base around, and completely destroying the setup. It finally escaped and I repositioned the station directly underneath the power outlet and hung the cable up carefully so it could not do that again.

I wandered out, came back a few minutes later and it had docked and I got that the cleaning was complete. The little piece of paper was still where it laid.

I started the unit up again to clean, it came out about two feet, turned, went to the wall, turned, came back, turned and went to the docking station telling me it was done. I tried pressing the button up top, same results. I told it to mop only. Same results. Told it to vacuum only. Same results.

I decided to delete the map and try again. After my second quick mapping, on the first run I decided to stay for the entire thing. It drove to three locations in the room, turned around at each, and went directly back to the base unit.

I went to edit the map and evidently everything it had mapped was listed as don’t vacuum/mop. Changing this to ignore resulted in the vacuum actually working although it does concern me why it would discover and then default to don’t clean here.

I ran the unit again, the piece of paper on the ground was removed, and things looked pretty good. It vacuumed up a fair amount of dirt, about what I would expect our cleaner’s vacuum to have left. It also vacuumed up a spider that is alive and I can now never touch the thing again.

I decided to run the unit again and choose extreme power… whoo hoo. a while later (24 minutes if I remember correctly,) I got the notification that it was done and successful. I opened the app and noticed the puck indicating the vacuum was not at the base station. I went into the office and yeah, it stopped. No reason given. No error message saying something prevented it from returning to the dock. Just stopped. Appears to have done a good job, but it stopped. Worked once, then done. Screw it boss I’m taking a nap right here.

I have attempted to wipe and restart and there is no evident option to do this from the software.

Evidently I chose vacuum and mop assuming it would not mop my carpet. With however my map is set up however that was not the case. Maybe the carpet sensors are not detecting my carpet as carpet. I have now manually set it to carpet.

Thus far

Keeping in mind this review isn’t done

• Software needs some work
• Vacuum is fairly quiet compared to other less powerful vacuums
• Doesn’t detect plastic floor coverings as a different surface – no mopping for them
• Obstacle avoidance doesn’t appear to avoid low hanging wires
• You have to remove the entire top to access dust and water containers. Attempting to access water container knocks it out of the charging dock.
• Chairs, tables, etc do not appear to be recognized. They are avoided but this makes defining no go zones a bit difficult.
• 3D view doesn’t show cleaning progress, no detected furniture or obstacles listed (maybe after more than 5 runs?)
• No hair tangled on brush, but too early to go “whoo hoo!”
• No recall / return to home from the app? (button works)

Wrapping up for the moment

I can not manufacture time and enough dirt and hair to complete the testing this needs at this point but at the moment I speculate that a software and firmware update are going to make this an extremely good little vacuum, but at the moment due to the experience the NARWAL Freo X Plus is a bit frustrating and I consider just ok. We’ll see tomorrow when I throw it in a room it needs to mop and vacuum.

Where’s the NARWAL Freo X Plus available?

You can grab a NARWAL Freo X Plus on Narwal’s website or on Amazon.

NARWAL Freo X Plus running review by Paul E King first appeared on Pocketables.

The Narwal Freo X Plus is a new puck robo vac from Narwal that brings something new to the table: “Guaranteed 0% tangle rate with pet fur and long hair up to 16 inches.”

Right now I am in the process of testing and reviewing the Narwal Freo X Plus. Unfortunately, or fortunately, I don’t have a whole lot of hair or filthy floors to really give it a good short turnaround review (it was received last week). A real review is going to come later when it’s been used and exposed to a real environment. Consider this marketing for the review rather than an endorsement.

If like me most of your interactions with your robot vacuum involve taking a knife and removing hair from a large lump that used to be the brush, you’ll know what a difference this could make.

The Narwal Freo X Plus appears to be a more self-contained version of the Freo X Ultra with a minimalist docking station and slightly less suction, however having not reviewed that one I can’t go line by line comparing them.

7800pa suction tops the charts in terms of tiny but mighty suction, although as we’ve discussed previously that it’s airflow that counts more than suction power. Both really, but we’ll see.

It packs nearly two months of onboard dust and waste storage, a removable disposable storage bag, and claims to be able to avoid bumping into things utilizing multiple LiDAR systems to do so.

Like my beloved Rhonda, it has an intelligent lifting mop that will lift a third of an inch so that it doesn’t drag smelly mop water across your rug.

The software looks cool… at least in the previews. Reminds me a bit of the Xaomi/Roborock software and I wonder if they aren’t the same thing (this is how early I am in testing this).

Anyway, I will have a review when I have it tested. The Narwal Freo X Plus looks like a pet-lover’s dream, but so have many other vacuums I’ve tested before that made this claim. We’ll see how it fairs against two shorthaired cats and three longhaired humans.

There is / was an early bird discount using code NARWALNEW001. I am assuming this was on their website.

The Narwal Freo X Plus should be releasing on Amazon today, and also on Narwal’s website. I’m posting this after the embargo hour and neither link is showing in stock or orderable.

Reviews from Vine (Amazon’s free review program) tend to indicate it’s currently well loved, however these are first week reviews of free product and I highly doubt anyone can give this a thorough review until they’ve lived with it a bit.

Narwal Freo X Plus specs

Anyhow, I expect to have a rundown of how it fares against a whole lot of hair shortly.

Have started the running review of the unit here

Narwal Freo X Plus introduces a tangle free main brush in a small footprint vac by Paul E King first appeared on Pocketables.

The Narwal Freo X Plus is a new puck robo vac from Narwal that brings something new to the table: “Guaranteed 0% tangle rate with pet fur and long hair up to 16 inches.”

Right now I am in the process of testing and reviewing the Narwal Freo X Plus. Unfortunately, or fortunately, I don’t have a whole lot of hair or filthy floors to really give it a good short turnaround review (it was received last week). A real review is going to come later when it’s been used and exposed to a real environment. Consider this marketing for the review rather than an endorsement.

If like me most of your interactions with your robot vacuum involve taking a knife and removing hair from a large lump that used to be the brush, you’ll know what a difference this could make.

The Narwal Freo X Plus appears to be a more self-contained version of the Freo X Ultra with a minimalist docking station and slightly less suction, however having not reviewed that one I can’t go line by line comparing them.

7800pa suction tops the charts in terms of tiny but mighty suction, although as we’ve discussed previously that it’s airflow that counts more than suction power. Both really, but we’ll see.

It packs nearly two months of onboard dust and waste storage, a removable disposable storage bag, and claims to be able to avoid bumping into things utilizing multiple LiDAR systems to do so.

Like my beloved Rhonda, it has an intelligent lifting mop that will lift a third of an inch so that it doesn’t drag smelly mop water across your rug.

The software looks cool… at least in the previews. Reminds me a bit of the Xaomi/Roborock software and I wonder if they aren’t the same thing (this is how early I am in testing this).

Anyway, I will have a review when I have it tested. The Narwal Freo X Plus looks like a pet-lover’s dream, but so have many other vacuums I’ve tested before that made this claim. We’ll see how it fairs against two shorthaired cats and three longhaired humans.

There is / was an early bird discount using code NARWALNEW001. I am assuming this was on their website.

The Narwal Freo X Plus should be releasing on Amazon today, and also on Narwal’s website. I’m posting this after the embargo hour and neither link is showing in stock or orderable.

Reviews from Vine (Amazon’s free review program) tend to indicate it’s currently well loved, however these are first week reviews of free product and I highly doubt anyone can give this a thorough review until they’ve lived with it a bit.

Narwal Freo X Plus specs

Anyhow, I expect to have a rundown of how it fares against a whole lot of hair shortly.

Narwal Freo X Plus introduces a tangle free main brush in a small footprint vac by Paul E King first appeared on Pocketables.