Přihlásit se
DDR5 PMICs Enable Smarter, Power-Efficient Memory Modules
Power management has received increasing focus in microelectronic systems as the need for greater power density, efficiency and precision have grown apace. One of the important ongoing trends in service of these needs has been the move to localizing power delivery. To optimize system power, it’s best to deliver as high a voltage as possible to the endpoint where the power is consumed. Then at the endpoint, that incoming high voltage can be regulated into the lower voltages with higher currents required by the endpoint components.
We saw this same trend play out in the architecting of the DDR5 generation of computer main memory. In planning for DDR5, the industry laid out ambitious goals for memory bandwidth and capacity. Concurrently, the aim was to maintain power within the same envelope as DDR4 on a per module basis. In order to achieve these goals, DDR5 required a smarter DIMM architecture; one that would embed more intelligence in the DIMM and increase its power efficiency. One of the biggest architectural changes of this smarter DIMM architecture was moving power management from the motherboard to an on-module Power Management IC (PMIC) on each DDR5 RDIMM.
In previous DDR generations, the power regulator on the motherboard had to deliver a low voltage at high current across the motherboard, through a connector and then onto the DIMM. As supply voltages were reduced over time (to maintain power levels at higher data rates), it was a growing challenge to maintain the desired voltage level because of IR drop. By implementing a PMIC on the DDR5 RDIMM, the problem with IR drop was essentially eliminated.
In addition, the on-DIMM PMIC allows for very fine-grain control of the voltage levels supplied to the various components on the DIMM. As such, DIMM suppliers can really dial in the best power levels for the performance target of a particular DIMM configuration. On-DIMM PMICs also offered an economic benefit. Power management on the motherboard meant the regulator had to be designed to support a system with fully populated DIMMs. On-DIMM PMICs means only paying for the power management capacity you need to support your specific system memory configuration.
The upshot is that power management has become a major enabler of increasing memory performance. Advancing memory performance has been the mission of Rambus for nearly 35 years. We’re intimate with memory subsystem design on modules, with expertise across many critical enabling technologies, and have demonstrated the disciplines required to successfully develop chips for the challenging module environment with its increased power density, space constraints and complex thermal management challenges.
As part of the development of our DDR5 memory interface chipset, Rambus built a world-class power management team and has now introduced a new family of DDR5 server PMICs. This new server PMIC product family lays the foundation for a roadmap of future power management chips. As AI continues to expand from training to inference, increasing demands on memory performance will extend beyond servers to client systems and drive the need for new PMIC solutions tailored for emerging use cases and form factors across the computing landscape.
Resources:
- DDR5 server memory interface chipset
- DDR5 server power management ICs
- White Paper: Data Center Evolution: DDR5 DIMMs Advance Server Performance
The post DDR5 PMICs Enable Smarter, Power-Efficient Memory Modules appeared first on Semiconductor Engineering.
