A new technical paper titled “Survey of Deep Learning Accelerators for Edge and Emerging Computing” was published by researchers at University of Dayton and the Air Force Research Laboratory.

Abstract

“The unprecedented progress in artificial intelligence (AI), particularly in deep learning algorithms with ubiquitous internet connected smart devices, has created a high demand for AI computing on the edge devices. This review studied commercially available edge processors, and the processors that are still in industrial research stages. We categorized state-of-the-art edge processors based on the underlying architecture, such as dataflow, neuromorphic, and processing in-memory (PIM) architecture. The processors are analyzed based on their performance, chip area, energy efficiency, and application domains. The supported programming frameworks, model compression, data precision, and the CMOS fabrication process technology are discussed. Currently, most commercial edge processors utilize dataflow architectures. However, emerging non-von Neumann computing architectures have attracted the attention of the industry in recent years. Neuromorphic processors are highly efficient for performing computation with fewer synaptic operations, and several neuromorphic processors offer online training for secured and personalized AI applications. This review found that the PIM processors show significant energy efficiency and consume less power compared to dataflow and neuromorphic processors. A future direction of the industry could be to implement state-of-the-art deep learning algorithms in emerging non-von Neumann computing paradigms for low-power computing on edge devices.”

Find the technical paper here. Published July 2024.

Alam, Shahanur, Chris Yakopcic, Qing Wu, Mark Barnell, Simon Khan, and Tarek M. Taha. 2024. “Survey of Deep Learning Accelerators for Edge and Emerging Computing” Electronics 13, no. 15: 2988. https://doi.org/10.3390/electronics13152988.

The post Survey of Energy Efficient PIM Processors appeared first on Semiconductor Engineering.

A new technical paper titled “Survey of Deep Learning Accelerators for Edge and Emerging Computing” was published by researchers at University of Dayton and the Air Force Research Laboratory.

Abstract

“The unprecedented progress in artificial intelligence (AI), particularly in deep learning algorithms with ubiquitous internet connected smart devices, has created a high demand for AI computing on the edge devices. This review studied commercially available edge processors, and the processors that are still in industrial research stages. We categorized state-of-the-art edge processors based on the underlying architecture, such as dataflow, neuromorphic, and processing in-memory (PIM) architecture. The processors are analyzed based on their performance, chip area, energy efficiency, and application domains. The supported programming frameworks, model compression, data precision, and the CMOS fabrication process technology are discussed. Currently, most commercial edge processors utilize dataflow architectures. However, emerging non-von Neumann computing architectures have attracted the attention of the industry in recent years. Neuromorphic processors are highly efficient for performing computation with fewer synaptic operations, and several neuromorphic processors offer online training for secured and personalized AI applications. This review found that the PIM processors show significant energy efficiency and consume less power compared to dataflow and neuromorphic processors. A future direction of the industry could be to implement state-of-the-art deep learning algorithms in emerging non-von Neumann computing paradigms for low-power computing on edge devices.”

Find the technical paper here. Published July 2024.

Alam, Shahanur, Chris Yakopcic, Qing Wu, Mark Barnell, Simon Khan, and Tarek M. Taha. 2024. “Survey of Deep Learning Accelerators for Edge and Emerging Computing” Electronics 13, no. 15: 2988. https://doi.org/10.3390/electronics13152988.

The post Survey of Energy Efficient PIM Processors appeared first on Semiconductor Engineering.

A new technical paper titled “Experimental demonstration of magnetic tunnel junction-based computational random-access memory” was published by researchers at University of Minnesota and University of Arizona, Tucson.

Abstract

“The conventional computing paradigm struggles to fulfill the rapidly growing demands from emerging applications, especially those for machine intelligence because much of the power and energy is consumed by constant data transfers between logic and memory modules. A new paradigm, called “computational random-access memory (CRAM),” has emerged to address this fundamental limitation. CRAM performs logic operations directly using the memory cells themselves, without having the data ever leave the memory. The energy and performance benefits of CRAM for both conventional and emerging applications have been well established by prior numerical studies. However, there is a lack of experimental demonstration and study of CRAM to evaluate its computational accuracy, which is a realistic and application-critical metric for its technological feasibility and competitiveness. In this work, a CRAM array based on magnetic tunnel junctions (MTJs) is experimentally demonstrated. First, basic memory operations, as well as 2-, 3-, and 5-input logic operations, are studied. Then, a 1-bit full adder with two different designs is demonstrated. Based on the experimental results, a suite of models has been developed to characterize the accuracy of CRAM computation. Scalar addition, multiplication, and matrix multiplication, which are essential building blocks for many conventional and machine intelligence applications, are evaluated and show promising accuracy performance. With the confirmation of MTJ-based CRAM’s accuracy, there is a strong case that this technology will have a significant impact on power- and energy-demanding applications of machine intelligence.”

Find the technical paper here. Published July 2024.  Find the University of Minnesota’s news release here.

Lv, Y., Zink, B.R., Bloom, R.P. et al. Experimental demonstration of magnetic tunnel junction-based computational random-access memory. npj Unconv. Comput. 1, 3 (2024). https://doi.org/10.1038/s44335-024-00003-3.

The post MTJ-Based CRAM Array appeared first on Semiconductor Engineering.

A new technical paper titled “IR drop Prediction Based on Machine Learning and Pattern Reduction” was published by researchers at National Tsing Hua University, National Taiwan University of Science and Technology, and MediaTek.

Abstract (partial)
“In this paper, we propose a machine learning-based method to predict IR drop levels and present an algorithm for reducing simulation patterns, which could reduce the time and computing resources required for IR drop analysis within the ECO flow. Experimental results show that our approach can reduce the number of patterns by approximately 50%, thereby decreasing the analysis time while maintaining accuracy.”

Find the technical paper here. Published June 2024.

Yong-Fong Chang, Yung-Chih Chen, Yu-Chen Cheng, Shu-Hong Lin, Che-Hsu Lin, Chun-Yuan Chen, Yu-Hsuan Chen, Yu-Che Lee, Jia-Wei Lin, Hsun-Wei Pao, Shih-Chieh Chang, Yi-Ting Li, and Chun-Yao Wang. 2024. IR drop Prediction Based on Machine Learning and Pattern Reduction. In Proceedings of the Great Lakes Symposium on VLSI 2024 (GLSVLSI ’24). Association for Computing Machinery, New York, NY, USA, 516–519. https://doi.org/10.1145/3649476.3658775

The post ML Method To Predict IR Drop Levels appeared first on Semiconductor Engineering.

A technical paper titled “On Hardware-efficient Inference in Probabilistic Circuits” was published by researchers at Aalto University and UCLouvain.

Abstract:

“Probabilistic circuits (PCs) offer a promising avenue to perform embedded reasoning under uncertainty. They support efficient and exact computation of various probabilistic inference tasks by design. Hence, hardware-efficient computation of PCs is highly interesting for edge computing applications. As computations in PCs are based on arithmetic with probability values, they are typically performed in the log domain to avoid underflow. Unfortunately, performing the log operation on hardware is costly. Hence, prior work has focused on computations in the linear domain, resulting in high resolution and energy requirements. This work proposes the first dedicated approximate computing framework for PCs that allows for low-resolution logarithm computations. We leverage Addition As Int, resulting in linear PC computation with simple hardware elements. Further, we provide a theoretical approximation error analysis and present an error compensation mechanism. Empirically, our method obtains up to 357x and 649x energy reduction on custom hardware for evidence and MAP queries respectively with little or no computational error.”

Find the technical paper here. Published May 2024 (preprint). CODE: https://github.com/lingyunyao/AAI_Probabilistic_Circuits

Yao, Lingyun, Martin Trapp, Jelin Leslin, Gaurav Singh, Peng Zhang, Karthekeyan Periasamy, and Martin Andraud. “On Hardware-efficient Inference in Probabilistic Circuits.” arXiv preprint arXiv:2405.13639 (2024).

Related Reading
Architecting Chips For High-Performance Computing
Data center IC designs are evolving, based on workloads, but making the tradeoffs for those workloads is not always straightforward.
AI Tradeoffs At The Edge
The best ways to optimize AI efficiency today, and other options under development.

The post Dedicated Approximate Computing Framework To Efficiently Compute PCs On Hardware appeared first on Semiconductor Engineering.

A new technical paper titled “xTern: Energy-Efficient Ternary Neural Network Inference on RISC-V-Based Edge Systems” was published by researchers at ETH Zurich and Universita di Bologna.

Abstract
“Ternary neural networks (TNNs) offer a superior accuracy-energy trade-off compared to binary neural networks. However, until now, they have required specialized accelerators to realize their efficiency potential, which has hindered widespread adoption. To address this, we present xTern, a lightweight extension of the RISC-V instruction set architecture (ISA) targeted at accelerating TNN inference on general-purpose cores. To complement the ISA extension, we developed a set of optimized kernels leveraging xTern, achieving 67% higher throughput than their 2-bit equivalents. Power consumption is only marginally increased by 5.2%, resulting in an energy efficiency improvement by 57.1%. We demonstrate that the proposed xTern extension, integrated into an octa-core compute cluster, incurs a minimal silicon area overhead of 0.9% with no impact on timing. In end-to-end benchmarks, we demonstrate that xTern enables the deployment of TNNs achieving up to 1.6 percentage points higher CIFAR-10 classification accuracy than 2-bit networks at equal inference latency. Our results show that xTern enables RISC-V-based ultra-low-power edge AI platforms to benefit from the efficiency potential of TNNs.”

Find the technical paper here. Published May 2024.

Rutishauser, Georg, Joan Mihali, Moritz Scherer, and Luca Benini. “xTern: Energy-Efficient Ternary Neural Network Inference on RISC-V-Based Edge Systems.” arXiv preprint arXiv:2405.19065 (2024).

The post Efficient TNN Inference on RISC-V Processing Cores With Minimal HW Overhead appeared first on Semiconductor Engineering.

A technical paper titled “NeRTCAM: CAM-Based CMOS Implementation of Reference Frames for Neuromorphic Processors” was published by researchers at Carnegie Mellon University.

Abstract:

“Neuromorphic architectures mimicking biological neural networks have been proposed as a much more efficient alternative to conventional von Neumann architectures for the exploding compute demands of AI workloads. Recent neuroscience theory on intelligence suggests that Cortical Columns (CCs) are the fundamental compute units in the neocortex and intelligence arises from CC’s ability to store, predict and infer information via structured Reference Frames (RFs). Based on this theory, recent works have demonstrated brain-like visual object recognition using software simulation. Our work is the first attempt towards direct CMOS implementation of Reference Frames for building CC-based neuromorphic processors. We propose NeRTCAM (Neuromorphic Reverse Ternary Content Addressable Memory), a CAM-based building block that supports the key operations (store, predict, infer) required to perform inference using RFs. NeRTCAM architecture is presented in detail including its key components. All designs are implemented in SystemVerilog and synthesized in 7nm CMOS, and hardware complexity scaling is evaluated for varying storage sizes. NeRTCAM system for biologically motivated MNIST inference with a storage size of 1024 entries incurs just 0.15 mm^2 area, 400 mW power and 9.18 us critical path latency, demonstrating the feasibility of direct CMOS implementation of CAM-based Reference Frames.”

Find the technical paper here. Published May 2024 (preprint).

Nair, Harideep, William Leyman, Agastya Sampath, Quinn Jacobson, and John Paul Shen. “NeRTCAM: CAM-Based CMOS Implementation of Reference Frames for Neuromorphic Processors.” arXiv preprint arXiv:2405.11844 (2024).

Related Reading
Running More Efficient AI/ML Code With Neuromorphic Engines
Once a buzzword, neuromorphic engineering is gaining traction in the semiconductor industry.

The post CAM-Based CMOS Implementation Of Reference Frames For Neuromorphic Processors (Carnegie Mellon U.) appeared first on Semiconductor Engineering.

A technical paper titled “Enhancing Functional Safety in Automotive AMS Circuits through Unsupervised Machine Learning” was published by researchers at University of Texas at Dallas, Intel Corporation, NXP Semiconductors, and Texas Instruments.

Abstract:

“Given the widespread use of safety-critical applications in the automotive field, it is crucial to ensure the Functional Safety (FuSa) of circuits and components within automotive systems. The Analog and Mixed-Signal (AMS) circuits prevalent in these systems are more vulnerable to faults induced by parametric perturbations, noise, environmental stress, and other factors, in comparison to their digital counterparts. However, their continuous signal characteristics present an opportunity for early anomaly detection, enabling the implementation of safety mechanisms to prevent system failure. To address this need, we propose a novel framework based on unsupervised machine learning for early anomaly detection in AMS circuits. The proposed approach involves injecting anomalies at various circuit locations and individual components to create a diverse and comprehensive anomaly dataset, followed by the extraction of features from the observed circuit signals. Subsequently, we employ clustering algorithms to facilitate anomaly detection. Finally, we propose a time series framework to enhance and expedite anomaly detection performance. Our approach encompasses a systematic analysis of anomaly abstraction at multiple levels pertaining to the automotive domain, from hardware- to block-level, where anomalies are injected to create diverse fault scenarios. By monitoring the system behavior under these anomalous conditions, we capture the propagation of anomalies and their effects at different abstraction levels, thereby potentially paving the way for the implementation of reliable safety mechanisms to ensure the FuSa of automotive SoCs. Our experimental findings indicate that our approach achieves 100% anomaly detection accuracy and significantly optimizes the associated latency by 5X, underscoring the effectiveness of our devised solution.”

Find the technical paper here. Published April 2024 (preprint).

Arunachalam, Ayush, Ian Kintz, Suvadeep Banerjee, Arnab Raha, Xiankun Jin, Fei Su, Viswanathan Pillai Prasanth, Rubin A. Parekhji, Suriyaprakash Natarajan, and Kanad Basu. “Enhancing Functional Safety in Automotive AMS Circuits through Unsupervised Machine Learning.” arXiv preprint arXiv:2404.01632 (2024).

Related Reading
Creating IP In The Shadow Of ISO 26262
Automotive regulations can turn an interesting chip design project into a complex and often frustrating checklist exercise. In the case of ISO 26262, that includes a 12-part standard for automotive safety.
Shifting Left Using Model-Based Engineering
MBSE becomes useful for identifying potential problems earlier in the design flow, but it’s not perfect.

The post Framework For Early Anomaly Detection In AMS Components Of Automotive SoCs appeared first on Semiconductor Engineering.